Premium Quality Features
P&L doors and
jambs are made in the USA
from the finest
wood solids, veneers, and
engineered cores for structural
Stiles, rails, and
panels are plain sliced veneer laminated
onto a particle board
core to insure stability and durability,
splitting and minimizing expansion and
rails, and bladder formed veneer panels
are constructed not to
warp, split, or crack. Our stiles,
rails, and panels are
consistent in graining and color,
creating a beautiful
OPTION - green door core has an NAUF
(No Added Urea
Formaldehyde) core, as well as using
low VOC (Volatile
Organic Compound) adhesives.
Upgrade to Green + 10%
Lag Bolt Construction: Lag bolts are bored in
the edge of the door to tightly
join the stiles and rails.
These metal bolts are
considerably stronger than
wood dowels used by most
Choice of raised or flat panel profile
Choose from Red Oak,
Poplar, Maple, Fir,
Cherry, Hickory, Walnut, Mahogany, or White Oak
12", 18", 24", 28", 30", 32" or 36" widths
and 80" (6/8), 84"
(7/0) or 96" (8/0) heights
Doors are 1 3/8" thick.
Upgrade option - 1 3/4" thick
doors + 18%
Available door slab only or
as a pre-hung unit.
The wood in these doors comes from
well managed forests, independently
certified in accordance with the
of the Forest Stewardship
door goes through a 3-stage sanding process - the last stage of
which a through inspection and sanding by hand to eliminate the
cross-grain scratches that automated sanding machines make. By
removing these blemishes, we give you a clean door that is virtually
ready to stain and finish with minimal follow-up sanding. In
addition, doors are examined under ultra violet light so that glue
residue can be spotted and removed before shipment. All this extra
care sets us apart from others in the industry and reduces the time
and expense of on-site work.
PL-60 Style Interior Wood Panel Door
Shown above: Cherry with a raised panel profile.
Picture this door in: